Slots | |
---|---|
Occupied slots | 2 |
Supply | |
Connection | backplane bus |
Rated voltage | 12 V DC , only in connection with the power supplies FB92** |
Power dissipation | 1.4 W |
Power consumption | 1.4 W |
Internal bus | |
Connection | backplane bus |
Interface | manufacturer-specific bus to standard com unit |
Digital output | |
Number of channels | 2 |
Field device interface | |
Connection | channel I: 1-2 NO; channel II: 3-4 NO; channel III: 5-6 NO; channel IV: 7-8 NO; channel V: 9-10 NO; channel VI: 11-12 NO; channel VII: 13-14 NO; channel VIII: 15-16 NO |
Relay | |
Response time | 20 ms (depending on bus cycle time) |
Watchdog | within 0.5 s the device goes in safe state, e.g. after loss of communication |
Indicators/settings | |
LED indication | LED green: supply LED red: communication fault |
Coding | optional mechanical coding via front socket |
Directive conformity | |
Electromagnetic compatibility | |
Conformity | |
Electromagnetic compatibility | NE 21:2007 |
Degree of protection | IEC 60529:2000 |
Environmental test | EN 60068-2-14:2009 |
Shock resistance | EN 60068-2-27:2009 |
Vibration resistance | EN 60068-2-6:2008 |
Damaging gas | EN 60068-2-42:2003 |
Relative humidity | EN 60068-2-78:2001 |
Ambient conditions | |
Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
Storage temperature | -25 ... 85 °C (-13 ... 185 °F) |
Relative humidity | 95 % non-condensing |
Shock resistance | shock type I, shock duration 11 ms, shock amplitude 15 g, number of shocks 18 |
Vibration resistance | frequency range 10 ... 150 Hz; transition frequency: 57.56 Hz, amplitude/acceleration ± 0.075 mm/1 g; 10 cycles frequency range 5 ... 100 Hz; transition frequency: 13.2 Hz amplitude/acceleration ± 1 mm/0.7 g; 90 minutes at each resonance |
Damaging gas | designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3 |
Mechanical specifications | |
Degree of protection | IP20 (module) , a separate housing is required acc. to the system description |
Connection | Exe spring terminal with protective cover |
Mass | approx. 750 g |
Dimensions | 57 x 107 x 132 mm (2.2 x 4.2 x 5.2 inch) |
Data for application in connection with hazardous areas | |
EU-Type Examination Certificate | BVS 11 ATEX E 093 X |
Galvanic isolation | |
Directive conformity | |
International approvals | |
ATEX approval | BVS 11 ATEX E 093X |
INMETRO | Brazil: TUV 14.1599X |
EAC approval | Russia: RU C-IT.MIII06.B.00129 |
Marine approval | |
General information | |
System information | The module has to be mounted in appropriate backplanes (FB92**) in Zone 1, 2, or outside hazardous areas. Observe the |